| 供應商 | 北京汐源科技有限公司 店鋪 |
|---|---|
| 認證 | |
| 報價 | 面議 |
| 關鍵詞 | 漢高ABLESTIKJM7000導電膠 |
| 所在地 | 北京建國路15號院 |
9年
樂泰ABLESTIK JM 7000
氰酸酯
外觀銀
治療熱治療
填料型銀
●良好的附著力
●水分低
●離子雜質低
●可靠性高
●空洞少
●導電
●導熱
應用模連接
基板氧化鋁，鍍金氧化鋁
TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity, HAAKE RV-20 Rotoviscometer, mPa·s (cP):
Cone 1o @ Shear rate 22 s
-1 9,000
Work Life @ 25°C, hours 8 to 16
Shelf Life @ -40°C (from date of manufacture), days 365
TYPICAL CURING PERFORMANCE
Cure Schedule
30 minutes @ 150°C
Suggested temperature cures are from 150 to 350oC. For
applications requiring higher electrical conductivity, a cure cycle of 15
minutes @ 300oC is recommended. Product properties will not be
reduced by subsequent post die attach thermal exposure, i.e.,
wirebond, and/or lid seal up to 370oC.
TYPICAL PERFORMANCE OF CURED MATERIAL
Die Shear Strength:
2 X 2 mm Si die, kg-f,
cured 20 minutes @ 150oC
Substrate DSS
Ag/Cu LF ≥5
Tensile Strength :
cured 30 minutes @ 300oC, MPa
After Cure After 1000 TC'C"
>17 >17
Radius of Curvature:
Si die on Alumina, meters
cured 30 minutes @ 300oC
Chip Size: ROC
15 x 15 mm > 5
漢高樂泰導電膠,楊浦厚膜漢高ABLESTIKJM7000導電膠
面議
產品名：漢高ABLESTIKJM7000導電膠,JM7000導電膠,漢高導電膠,樂泰導電膠
ablestik84-1A導電膠
面議
產品名：導電膠,耐高溫導電膠,84-1A導電膠,84-1LMI導電膠
漢高漢高導電膠,南匯厚膜電路漢高ABLESTIKJM7000導電膠
面議
產品名：漢高ABLESTIKJM7000導電膠,JM7000導電膠,漢高導電膠,樂泰導電膠
青島樂泰SF7365清洗劑
面議
產品名：樂泰SF 7365清洗劑,表面清潔劑
衡陽樂泰US2350灌封膠雙組份灌封膠
面議
產品名：樂泰US 2350灌封膠,聚氨酯灌封膠,雙組份灌封膠
西藏樂泰222螺紋膠
面議
產品名：樂泰 222 螺紋膠,鎖固膠
荊州樂泰277螺紋膠鎖固膠
面議
產品名：樂泰 277 螺紋膠,鎖固膠
撫順樂泰545螺紋膠
面議
產品名：樂泰545螺紋膠,密封膠